1. The main factors affecting the marking machine are divided into two aspects: internal factors and workpieces.

The main internal factors are the laser frequency of the marking machine, the laser spot mode and the beam divergence angle, the laser power, and the reasonable optical overall shape to match the auxiliary gas material during processing. The internal factors are mainly paid attention to when selecting the marking machine model in the early stage, and the laser engineer’s advice should be followed to purchase. Another factor that the customer needs to pay attention to during processing is mainly the marking density of the marking machine, the marking area, the depth of the marking and the size of the laser spot.

2. Marking density of marking machine

In the case of the same format, the same spot, and the same depth, the higher the density of the marking machine, the slower the corresponding marking speed. The reason is that the density directly increases the marking area of the marking machine.

Three, marking machine marking format

Because the deflection area of the large-format marking galvanometer is increased, the marking speed of the large-format marking machine is slower than that of the small-format marking.

Fourth, the marking depth of the marking machine

According to requirements, if the marking depth of the marking machine needs to be deepened, the parameters of the marking machine need to be adjusted, and the power, current and other factors of the marking machine need to be increased. Therefore, the marking machine will be affected in these processes. Standard speed.

5. Laser spot size of marking machine

The smaller the spot of the marking machine, the smaller the corresponding marking volume. Therefore, the larger the spot, the faster the marking speed of the marking machine.